How to Measure for Stacked Washer Dryer: Dimensions Planning Guide

At a Glance:

Understanding Stacked Washer Dryer Dimensions

How to Measure Your Space Properly

Planning for Installation and Fit

Why Trust Tony’s?

Thinking about saving space in your laundry room with a stacked washer and dryer? You’re not alone—stacked units are a smart, space-efficient solution for homes of all sizes, from cozy condos to busy family houses. But before you make a purchase, it’s essential to measure correctly. From height and width to hookups and door clearances, even small details can make a big difference when it comes to fit and functionality. In this guide, we’ll walk you through how to measure your space properly, what dimensions to expect from stacked units, and how to plan for a smooth installation. Let’s get started so you can find the perfect setup without the guesswork.

Understanding Stacked Washer Dryer Dimensions

If you're appliance shopping and considering a stacked washer and dryer, understanding the dimensions is a great place to start. Stacked laundry appliances are perfect for saving space, but it’s important to make sure they’ll fit your available area comfortably. Here’s what to keep in mind:

Typical Dimensions

Most full-size stacked washer and dryer units measure around 27 inches wide, 30 to 34 inches deep, and 74 to 79 inches tall. These are ideal for laundry rooms with enough vertical clearance.

Stackable Front Load Sets vs. All-in-One Towers

• Stackable Front Load Sets consist of two separate appliances (a washer and a dryer) that can be stacked using a kit. These offer more flexibility and usually more features.
• All-in-One Towers are pre-assembled as a single unit. They’re simpler to install but may have fewer customization options.

Standard vs. Compact Models

Compact models are great for smaller spaces like apartments or condos. These usually measure about 24 inches wide and 66 to 72 inches tall, with a shallower depth — perfect when every inch counts.

When browsing washers and dryers, keep these measurements in mind and always check the manufacturer's specs before buying. Getting the right size ensures your laundry appliances work efficiently without any installation headaches.

Learn More: Is a Washer and Gas Dryer Set the Perfect Balance of Efficiency, Performance, and Value?

How to Measure Your Space Properly

Before bringing home a new stacked washer and dryer, getting accurate measurements is a must. Appliance sizes can vary, and a tight fit can lead to installation headaches—or worse, units that don’t fit at all. Here’s how to measure like a pro:

Measure the Height, Width, and Depth

• Use a tape measure to check the height from floor to ceiling where the unit will go. Most stacked washer dryer dimensions range from 70 to 75 inches in height.
• Measure the width—typically 27 inches for standard models—and the depth, which can range from 30 to 34 inches, depending on the unit.

Account for Ventilation and Airflow

• Leave at least 1 inch on each side and at the top for proper air circulation.
• If the unit is vented, ensure there’s space behind for the exhaust hose—usually about 4–6 inches of clearance is needed.

Check Door Clearance and Accessibility

• Ensure there’s enough space for washer and dryer doors to open fully. This is especially important in tight spaces or if doors swing outward.
• For closet installations, make sure the doors can close without touching the unit.

Plan for Extra Features

• If you’re considering pedestal drawers or stacking kits, factor those into your total height measurement.
• Also allow for wall clearance if the washer or dryer needs to sit a few inches forward for proper hookup access.

Taking the time to check these measurements carefully ensures your appliance fits comfortably and works efficiently in your space.

Learn More: 5 Best Washer Dryer Gas Sets in the Twin Cities

Planning for Installation and Fit

Now that you’ve measured your space, it’s time to think about where your stacked washer and dryer will go—and what’s needed to make the setup work seamlessly. Whether you're eyeing a GE or Samsung unit, or considering reliable brands like Whirlpool, LG, or Speed Queen, proper planning makes all the difference.

Here are a few things to keep in mind:

Pick the Right Spot

Ideal locations include:

• Closets or alcoves with louvered doors for airflow
• Laundry rooms with dedicated plumbing and electrical
• Apartments or condos with limited space but utility connections

Make sure the floor is level and sturdy enough to support the unit’s weight and vibrations.

Know Your Utility Requirements

• Most GE, Maytag, and Whirlpool models require a 240V outlet for the dryer and a standard 120V for the washer.
• You’ll need a hot and cold water line, a drain, and—unless it’s ventless—an exterior vent.
• Ventless options (like some Electrolux or LG models) are great for apartments or spaces without outdoor venting access.

Plan for Safe and Accessible Installation

• Always use a stacking kit for stability—it’s required by most manufacturers like Samsung and LG.
• Ensure hookups are easy to reach in case you need to shut off water or power.
• Leave enough clearance around the unit for proper airflow and future maintenance.

A little prep goes a long way. Choosing a quality washer and dryer combo from brands like GE, Electrolux, or Maytag—and making sure your space is ready—will help ensure a smooth install and long-lasting performance.

Learn More: Twin Cities Guide to Washer and Dryer Shopping

Conclusion

Wrapping up your planning with precise measurements ensures your stacked washer and dryer will fit perfectly and function efficiently in your home. From height and width to airflow and hookups, a little preparation can save a lot of hassle. If you’re in the Minneapolis, MN area and ready to upgrade your laundry setup, Tony’s Appliance is the best place to go. Their knowledgeable team can help you find the right washer and dryer combo for your space—and make sure installation is smooth from start to finish.